I carry a ton of tools at the
Clay Factory, I thought it might be nice to show you a few of them.
This first one on the list is mini wire tool, used for
Sgrafitto, the wiki definition for the word, give it a click.
Or for carving out small areas, like around the eyes when sculpting. I am also playing with tool for texturing.
This is the way I learned sgraffito on Ceramics back in the early 70's.
This is a lovely little wire tool with many applications and many possibilities.
I am going to show you "A" way to use it with Polymer clay-Cernit, Pinata inks, and the WS tool, called a wire stylus by the manufacturer.
Here is the link the the picture of it.
http://www.clayfactory.net/kempertools/pages/WS.htm
Here is how much it costs from my Clay Factory
http://www.clayfactory.net/kempertools/Page9.htm
Scroll down the page a little
You will need:
WS tool
Pinata Inks
Porcelain White Cernit
Pasta machine or stainless roller
Ruler
LED night light w/clear acrylic shade
sharp blade
glue- e6000 or scotch quick drying paper glue or Ultimate glue from Crafter's Pick
Step 1. Condition and roll out your clay on the thickest setting in your pasta machine.
Step 2. Make the sheet if clay 2 3/4" tall by 2" wide.
Step 3. Ink it, I am going to draw a basic Mountain scene for the project, please feel free to go nuts. Draw in the blue line for the sky. I am using Baja Blue Pinata.
Step 4. Blur the line with a cotton swab. I waited between pictures awhile, and the ink had dried partially
Step 5. Add more ink and blur. Fill the sky
Step 6. Using now, Lime green, I fill in the mountain.
Step 7. I used the Baja blue side of the cotton swab to blend the mountain and gave some variation to the green color of ink
Step 8. Once I make the sheets I let them dry. it only takes a hour or so to be completely dry or in my area right now about 10 minutes. The ink will also dry out the surface a bit and make the scratches easier and cleaner while carving.
Step 10. Start carving, the tip on mine bend down a little I like this. Cut in to the clay lightly with the wire and in one stroke with out turning the head of the tool pull the tool towards you at the same level.
Step 11. Start carve in the outline of the mountain. It is harder to turn the head of the tool as you go so go slow and steady and not too deep. With practice you will be amazing. If you work on cardboard you can turn the cardboard while you are carving. The wire tip needs or works best when it parallel
The more detail you put in the better it looks. You zentanglers are going to love this.
Step 12. Finish off the picture, it is a practice one anyway, Practice!
Step 13. You will have little bits of porcelain clay colored by inks so... to leave nothing to waste. Roll a ball of clay porcelain or another color in the little bits to clean them up and to use them up.
Step 14. Picked up.
Step 15. Roll in to the ball.
Step16. Flatten a little, make a hole in it, and cure in the oven at 275 degrees for 30 minutes.
Step 16. Bake your piece on the curve of the jar. I made this from one of my glass vitamin jars and I pressed the jar in to 1/2" logs of clay. They will stick so you can bake this piece with out gluing it.
Once the legs or logs on the bottom side of the jar are baked I glue with Scotch paper glue and let dry. That way I can re-bake this and use it over and over again.
Use the glues mentioned above to glue the Clay piece to the clear acrylic shade of the NightLight.
Do not block the Sensor with the clay sheet.
This night light is done with a mandala rubber stamp stamped right in to the porcelain colored clay.
The stamp is from Studio G, and distributed from Hampton Art Inc. Another great source of stamps for Polymer clay is
Rubber Stamp Plantation in Honolulu Hawaii. Tell Deb, Marie sent you!
After stamping and carving while the clay is raw drop on colors of ink and spread, wipe off extra ink with clean up solution added paper towel. Do not scrub with paper towel, but wipe off gently!
As beautiful hanging out during the day!
As it is lit up at night!
Have a great weekend, it is a holiday in the US, drive careful and be nice while you are out and about, you may give another being a reason to live another day by your miracle of kindness.
Turn the sheet of clay 1/4 turn and turn the pasta machine setting down to the 2nd thickest setting and roll the sheet through again. This will flatten all of the slivers on the sheet, you can add more if you wish to fill in holes or you can keep turn the sheet and the setting down each time you roll it through to get thin sheets of design to cover things with. 
This picture is to remind you what the colors and the stack looked like after all of these sections.
Now destroy the stack, pent up aggression? Me? Hell no….
"Like the moon, come out from behind the clouds! Shine."
